MotoSim EG VRC

May 9, 2019 | Author: niks691986 | Category: Simulation, Robot, Technology, Personal Computers, Computer Programming
Share Embed Donate


Short Description

Download MotoSim EG VRC...

Description

SOLUTIONS IN MOTION

®

MotoSim EG-VRC MotoSim® EG-VRC (Motoman Simulator Enhanced Graphics Graphics – Virtual Robot Control) is a comprehensivee software pacage that provides accurate 3D simulation of robot cells. This powerful comprehensiv simulation software can be used to optimize robot and equipment placement, as well as to perform collision detection, reach modeling and ccle calculations. It also provides accurate off-line programming of complex sstems. Virtual Robot Controller capabilit means that the simulation software now operates and displas the actual programming pendant interface for the DX100 and NX100 controllers. The VRC supports standard INFORM (robot language) instructions, and can completel simulate the DX100 and NX100 controller software in the PC environment, including sstem conguration functions and condition le editing.

HIGHLIGHTS

MotoSim EG-VRC n

Provides a displa of the DX100 or  NX100 robot controller pendant on a PC.

n

Robot movement is controlled through the pendant displa.

n

Users can import CAD les in .hmf, .hsf or .3ds formats.

SYNCHRONIZED MOTION

Teach Pendant Programming n

COORDINATED MOTION WITH EXTERNAL AXIS

TOP REASONS TO BUY! n  Accurate simulation and off-line  Accurate programming of complex robotic sstems. Provides “real” robot experience while programming off-line on a PC.

n

Improved simulation of advanced control capabilities between robots and external devices.

Using a standard 3D graphics engine provides abilit to add marups/comments marups/comm ents to robot simulation and accuratel measure distances. Abilit Abilit to create permanent measurement lines is a big advantage during the cell laout process.

n

MotoSim EG-VRC reduces programming time, thus increasing uptime of the production equipment. New parts can be programmed off-line before production begins, and existing robot programs can

High accurac allows programs to be tested on the PC instead of on the robot sstem, reducing robot downtime.

n

Enables user to mae changes to improve robot performance.

n

Detailed path calculation function plots robot’s trajector to simplif program verication .

n

Creates process angles, allowing user to create programs that maintain the robot’s tool orientation in relation to an uneven surface, such as a sharpl angled part, or  graduall changing shapes, such as propellers or motorccle gas tans.

Off-Line Programming n

n

Increase Uptime n

MotoSim EG Components n

Virtual Testing

Cell Layout Advantage n

n

Whether a programmer is using a teach pendant on a DX100 or NX100 controller or using MotoSim EG-VRC on a PC – the interface displa is exactl the same. Steps used to accomplish actions in the “virtual” world of the simulator  are identical to the actions required in the actual (real) world.

be modied to increase efcienc and reduce ccle time – without sacricing production schedules.

n

Robot paths, speeds and other  program data – such as tool center  points, user frames, and I/O monitors – can be dened on the PC. User can move the virtual robot, enter the data to create a robot program, and download it to the robot controller. When Motoman Robotics’ MotoCal ® software and optional lters are used, programs created in MotoSim EG-VRC can be downloaded to the robot controller with minimal or no touch-up.

Sample sstem cells are available on the installation CD and accessor parts.

Capabilities n

Enhanced multiple robot control.

n

Independent/coordinated motion functions.

n

External axis control and coordination.

n

Macro command.

n

Relative job.

n

Collision detection.

n

Same eas-to-use INFORM language instructions as the robot controller.

n

Can be used to minimize xturing errors.

n

Can be used to reduce robot installation time.

n

User-denable view.

n

Ccle time and reach analsis.

GIVE YOURSELF AN EDGE ...with MotoSim EG...a powerful tool that taes the guesswor out of sstem design.

MOTOSIM EG-VRC SCREENS

STANDARD WELD SYSTEMS

MATERIAL HANDLING APPLICATION

ASSEMBLY APPLICATION

PRESS LINE

OPTIMIZE YOUR DESIGN AND YOUR PROCESS...BEFORE THEY'RE BUILT! MINIMUM SYSTEM REQUIREMENTS

COMPATIBILITY n

DX100 controller 

n

Windows® XP

n

NX100 controller 

n

2 GHz processor 

n

NXC100 controller 

n

1 GB RAM (2 GB recommended)

n

256 M video card

NOTE: Previous controllers can not be created in MotoSim EG-VRC. MotoSim EG-VRC can open and pla bac CEL les (.cel) previousl created in MotoSim EG.

n

20 G hard drive (Sstems ma run on less)

www.motoman.com TECHNICAL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE DS-418-D ©2011 yASkAWAAMERICA, INC. JUNE 2011

MOTOMAN ROBOTICS 100 AUTOMATION WAy, MIAMISBURG, OHIO 45342 TEL: 937.847.6200 n FAX: 937.847.6277

MOTOMAN IS A REGISTERED TRADEMARk WINDOWS IS A REGISTERED TRADEMARk OF MICROSOFT  ALL OTHER MARkS ARE THE TRADEMARkS AND REGISTERED TRADEMARkS OF yASkAWA AMERICA, INC.

View more...

Comments

Copyright ©2017 chineseinfo.info Inc.
SUPPORT chineseinfo.info